Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for San Fernando Homeowners
Gate parts fail. Welds crack. Hinges sag. When it happens in San Fernando, the gate doesn’t just look bad, it stops protecting your home. Ironworks Gate Co. offers the Best Gate Parts & Welding in San Fernando, CA, having repaired and rebuilt driveway gates here for over 42 years. We handle everything from a worn hinge replacement to a full post reset and custom weld. Call (925) 307-8328 and a live person answers, day or night.
Victor Salinas founded this company in 1984 with one rule: fix it right, stand behind it in writing. That’s still how we work. Every San Fernando Gate Parts & Welding job carries our 90-Day Done Right Promise, a written guarantee with no fine print and no arguing. If it’s not right, we come back and make it right.
Most gate parts and welding repairs in San Fernando are completed in a single visit. You get an upfront price before we touch a single bolt, so there are no surprises on the bill. That’s a square deal, and it’s the only way we’ve ever worked.
What Our Gate Parts & Welding Service Includes
Hinge Replacement
Worn hinges are the most common reason a gate starts dragging or leaning. In San Fernando’s dry summers and occasional heavy winter rain, metal hinges expand, contract, and eventually wear out. We replace hinges with heavy-duty options sized to your gate’s weight, not whatever is on the shelf. If the hinge has wallowed out the post, we repair that at the same time so the new hinge actually has something solid to mount to.
You’ll know you need this when the gate scrapes the ground on the latch side, or when you can lift the gate and feel play in the hinge. Left alone, a bad hinge puts stress on the opener motor and the post. Fixed early, it’s a straightforward job.
Post Replacement
A leaning post is never just a leaning post. It’s usually rot at the base, a cracked concrete footing, or a post that was undersized from the start. In San Fernando, we see posts fail after decades of wind load and gate weight working against them. We dig out the old footing, set a new post plumb and level, and pour a footing sized for the gate’s actual weight and swing.
This is not a quick job, and it shouldn’t be. A post set in fresh concrete needs time to cure before the gate hangs on it. We schedule post replacements so your gate is back in service as soon as the concrete allows, and we build the footing to last another 40 years, not another five.
Rail Repair
A sagging top or bottom rail changes the whole geometry of the gate. The gate twists, the latch stops lining up, and the opener has to work harder. We cut out the damaged section, weld in new rail, and reinforce the joints so the gate hangs square again. On older gates, we often find the rail was too light for the span, and we upgrade it while we’re in there.
Rail repair usually means welding, and welding means heat. We do this on-site in San Fernando when we can, or we bring the gate to our Gate Parts & Welding in Sylmar shop if the repair calls for a jig and a bench. Either way, the result is a gate that closes like the day it was hung.
Custom Welding
Not every repair comes out of a catalog. When a gate has a broken picket, a cracked frame, or a section that rusted through, the right fix is often a custom weld. Our welders have been putting metal back together for decades, and they understand that a weld on a gate has to hold up to movement, not just look good.
We also weld decorative elements back into place, from scrollwork to security spikes. And if you’ve been meaning to add a section to widen the driveway opening, we can build and weld a matching extension. The goal is a repair you can’t spot from ten feet away.
Gate Rollers
Slide gates live and die by their rollers. When a roller wears flat or the bearing seizes, the gate shudders, groans, or simply refuses to move. In San Fernando, dust from the foothills gets into roller bearings and accelerates wear. We replace rollers, clean the track, and set the gate height so the rollers carry the weight evenly across their full span.
We stock rollers for most major slide gate systems, and when we don’t have the exact match, we machine or order it. A gate that rolls smoothly today is a gate that doesn’t burn out its opener motor tomorrow.
Latch & Lock
The latch is the part you touch every single day. When it sticks, jams, or no longer engages, the gate stops being secure and starts being a frustration. We repair and replace gate latches of all types, from simple gravity latches to locking hardware that integrates with your access control system. We also address the alignment issues that cause latches to fail in the first place.
If the lock has been forced or the strike plate has pulled loose, we weld the strike plate back into position and set the latch so it closes with a solid thunk, not a rattle. A gate that latches right is a gate that does its job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We’ve worked on hundreds of DoorKing slide and swing gates across San Fernando, and we know their frames, rollers, and latch hardware. When a DoorKing gate needs a part, we either have it on the truck or we know exactly which component to order. No guessing, no second trip because the wrong part showed up.
Ghost Controls and Mighty Mule openers are popular on residential gates throughout San Fernando, and we service the mechanical side of those systems regularly. The welding and hinge work that keeps a Ghost Controls gate swinging true is exactly what we do all day. Whatever brand is on your driveway, Ironworks Gate Co. can repair, rebuild, or replace the parts that make it work.
Whether your gate carries a Ghost Controls motor, a DoorKing frame, or a Mighty Mule actuator, we can help. And if the brand isn’t listed here, that’s fine. Ironworks Gate Co. is trained and equipped on nine leading gate-automation brands, and we approach every gate the same way: find the actual problem, fix it properly, and stand behind it in writing.
Signs You Need Gate Parts & Welding Right Now
- The gate scrapes or drags on the ground. This means a hinge is worn, a post has leaned, or a rail has sagged. The scraping sound is metal grinding against concrete, and it only gets worse. A dragging gate also forces the opener to work harder, which shortens its life.
- The gate wobbles when you push it. Play in the hinges or a loose post base creates movement that stresses every other component. What feels like a small wobble today becomes a cracked weld or a snapped hinge pin tomorrow.
- The gate leans visibly to one side. A leaning gate is almost always a post problem, and it will not fix itself. The longer it leans, the more weight shifts onto the hinge, and the faster everything wears out. In San Fernando’s clay soil, posts can also shift with seasonal moisture changes.
- You see rust bleeding through the paint or around the welds. Rust is metal losing its strength. A rusted weld is a weld that is about to fail. Catching rust early means grinding it back and treating it, which is a small job compared to replacing a snapped rail.
- The gate shudders or jerks when opening or closing. That stuttering motion on a slide gate usually points to flat rollers or a dirty, misaligned track. It’s also the kind of problem that burns out a motor. Fixing the rollers is much cheaper than replacing the opener.
Our Gate Parts & Welding Process - Step by Step
We work a simple, honest process that hasn’t changed much since 1984. You’ll know what’s happening, what it costs, and when we’ll be there.
- 1
Call and talk to a live person. When you call (925) 307-8328, a real person answers, 24 hours a day, 7 days a week. You tell us what’s wrong, and we schedule a visit at a time that works for you. We’ll be there when we say.
- 2
On-site diagnosis. A background-checked, uniformed technician arrives, listens to what you’ve noticed, and inspects the gate. We check hinges, posts, rails, rollers, latch alignment, and the opener’s strain. We measure, we test, and we find the actual problem, not just the symptom.
- 3
Upfront written price. Before any work begins, you get a firm price. No hourly open-ended charges, no “we’ll see how it goes.” You approve the number, and only then do we pick up a tool. This is the Ironworks way, and it’s been the Ironworks way for over 42 years.
- 4
Repair or fabrication. Most jobs are completed the same visit. We weld on-site when it’s safe and practical, and we have the common parts loaded on our trucks. If a part needs to be ordered or a post needs to cure, we tell you exactly what to expect and when we’ll return.
- 5
The 90-Day Done Right Promise. Every job, including gate parts and welding work, is covered by our written guarantee. If something isn’t right within 90 days, we come back and make it right. No paperwork, no arguing, no exceptions. That is the Keystone Standard, and it applies to every job we do in San Fernando.
How Much Does Gate Parts & Welding Cost in San Fernando?
Gate parts and welding costs in San Fernando depend on what’s broken, how heavy the gate is, and how accessible the work area is. Here’s what homeowners can generally expect:
- Hinge replacement: $150 to $450 per hinge, depending on the hinge size, gate weight, and whether the post needs repair at the mount.
- Post replacement: $400 to $1,200 per post, including excavation, new footing, and setting the gate back square. Larger estate gates run higher.
- Rail repair or custom welding: $120 to $600, depending on the extent of the damage and whether we weld on-site or in the shop.
- Gate roller replacement: $200 to $600 for residential slide gates, including rollers, track cleaning, and height adjustment.
- Latch and lock repair: $100 to $350 for most residential hardware, more for integrated locking systems.
What affects the price? Gate size and weight, post condition, whether concrete needs to be broken out, and the type of finish you want on the repair. A gate that is 16 feet wide and 400 pounds costs more to repair than a 6-foot walk gate, for the simple reason that everything on it is bigger.
Here’s how to avoid overpaying: get a written price before the work starts, ask whether the parts being quoted are OEM or generic, and find out if the warranty is written. Ours is. The 90-Day Done Right Promise is written on every quote, and your estimate is free. Call (925) 307-8328 and we’ll give you an exact number for your gate, not a guess.
We also offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. These are standing offers for every San Fernando customer, on every visit.
Gate Parts & Welding Near San Fernando - Our Service Area
Ironworks Gate Co. serves San Fernando and the surrounding communities, including Sylmar, Santa Clarita, Panorama City, Granada Hills, Sun Valley, Northridge, Van Nuys, Porter Ranch, and Reseda. We also reach Acton and Agua Dulce for larger estate properties. Most gate parts and welding calls in the San Fernando area are scheduled within one to three days, and we will always tell you the arrival window before you commit. If you’re in a nearby city, our home page has service details for the whole region, and we have dedicated pages for Gate Parts & Welding in Sylmar and Gate Parts & Welding in Santa Clarita.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in San Fernando
Gate parts and welding covers the physical repair and rebuild of a driveway gate: hinges, posts, rails, rollers, latches, and any custom metal fabrication needed to restore the gate’s structure. It’s the work that keeps the gate hanging straight, swinging freely, and closing securely. At Ironworks Gate Co., this is our core trade, and we’ve done it in San Fernando for over 42 years.
Most hinge, roller, latch, and welding repairs in San Fernando are completed in a single visit, usually within two to four hours. Post replacements take longer because the new concrete footing needs time to cure before the gate can hang on it, typically a few days. We’ll tell you the timeline before we start, and we’ll be there when we say.
Most residential gate parts and welding repairs in San Fernando run between $100 and $1,200, depending on the part and the work involved. Hinge replacement typically lands around $150 to $450 per hinge, while a full post replacement can reach $1,200 for larger estate gates. Every job is quoted upfront, in writing, before we start, and our estimates are free. Call (925) 307-8328 for an exact number.
Yes, we service Ghost Controls and DoorKing gates regularly across San Fernando, along with Mighty Mule, LiftMaster, FAAC, BFT, Linear, Viking, and Elite. We’re trained and equipped on nine leading gate-automation brands, so we diagnose and repair the correct component on the first visit. Whatever brand is on your driveway, we can help.
Yes. A live person answers our phone 24 hours a day, 7 days a week, including nights, weekends, and holidays. If your San Fernando gate is stuck open, stuck shut, or hanging by a single hinge, call (925) 307-8328 for Emergency Gate Parts & Welding in San Fernando, CA and we’ll talk through what’s happening and schedule the fastest possible visit.
Every job is covered by our 90-Day Done Right Promise, a written guarantee with no fine print. If something isn’t right within 90 days, we come back and fix it at no charge. No arguing, no paperwork, no exceptions. That promise has applied to every gate we’ve repaired in San Fernando since 1984.
Clear the area around both sides of the gate so our technician can access the hinges, posts, and opener. Move vehicles away from the driveway if possible. You don’t need to remove the gate or disconnect anything, we handle that. Just make sure we can get to the gate freely, and we’ll take it from there.
Schedule Your Gate Parts & Welding Service in San Fernando Today
If your San Fernando gate is sagging, scraping, or simply not closing the way it used to, call Ironworks Gate Co. at (925) 307-8328. We’ll answer, we’ll listen, and we’ll give you a free, no-obligation estimate for the repair. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving San Fernando since 1984.