Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for San Fernando Homeowners
A gate that won’t open, sags on its hinges, or makes a grinding sound every time the motor kicks in is more than an annoyance. It’s a daily frustration and, in many San Fernando neighborhoods, a real security concern. We’re Ironworks Gate Co., and we’ve been providing Best Gate Repair in San Fernando, CA for over 42 years. Our technicians are trained on nine major opener brands, and we complete most repairs in a single visit. A live person answers our phone 24 hours a day, 7 days a week, so when your gate fails, you’ll reach someone who can help, not a voicemail. Call (925) 307-8328 and we’ll get it sorted.
What Our Gate Repair Service Includes
Electric Gate Repair
An electric gate depends on a network of parts working together: the motor, the control board, the safety sensors, and the power supply. When one component fails, the entire system stalls. We diagnose the exact failure point before touching anything, then replace or repair only what’s needed. That approach saves you money and keeps your gate running like it should.
Automatic Gate Repair
Automatic gates fail in patterns. The most common issues we see in San Fernando are worn limit switches, damaged receiver boards, and capacitors that have given out after years in the heat. When we arrive, we trace the signal path from the remote or keypad to the motor to pinpoint where the system stopped responding. The goal is always the same: one visit, correct fix, gate working.
Hinge & Post Repair
A heavy steel gate exerts tremendous force on its hinges and posts. Over time, welds crack, hinge pins wear, and posts lean, especially in the expansive clay soil found across parts of the San Fernando Valley. We cut out damaged steel, re-weld with proper penetration, and reinforce posts so the gate hangs square and swings true. It’s blacksmith work, done by people who respect the metal.
Gate Realignment
When a gate drags on the ground or won’t close against the latch, misalignment is usually the culprit. Settled concrete, a bumped post, or simple years of use can throw a gate out of square. We reset the hinge geometry, shim and re-level the posts, and adjust the closer or motor travel so the gate moves through its full arc without binding.
Lock Repair
A gate lock takes constant abuse: weather, force, and thousands of cycles. When a lock fails, whether it’s a mechanical latch, an electric strike, or a Maglock, security drops to zero. We repair and replace locks across all major styles and can integrate a new lock into your existing access control or opener system. If your gate doesn’t lock, it doesn’t secure anything.
Weld & Rust Repair
Steel gates in San Fernando face dry heat, morning marine layer, and the occasional heavy rain year. That cycle breeds rust at joints, welds, and anywhere paint has chipped. We grind out rust, reinforce thin spots, and weld with a clean, full pass that restores the gate’s structural strength. Where needed, we prime and paint the repaired section to match the existing finish.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
Ironworks Gate Co. carries OEM and compatible parts for DoorKing and Elite systems, the two brands we see most often on San Fernando driveways. DoorKing operators are workhorses, and most failures we find are in the limit switch assembly or the main control board, both of which we typically have on the truck. Elite swing and slide operators develop gear wear and sensor drift over time, and our technicians can diagnose those issues on site without guesswork.
We also work on Ghost Controls and Mighty Mule systems, which are popular on residential gates across the Valley, and offer Sylmar Gate Repair as well. Ghost Controls kits run into trouble with receiver range and battery drain, while Mighty Mule arms often fail at the shear pin or the power connection. Whatever the make, our techs have the manuals, the parts sources, and the hands-on experience to get it working again. If you have a brand we didn’t list, call us and we’ll tell you straight whether we can fix it.
Signs You Need Gate Repair Right Now
- Grinding, squealing, or clunking during operation. That sound means a gear, bearing, or hinge is failing under load. The longer the gate runs with a bad part, the more damage it does to the parts around it.
- The gate stops halfway or reverses unexpectedly. This is usually a limit switch, obstruction sensor, or control board issue. A gate that reverses without command is unsafe, especially with children or pets nearby.
- Sagging gate that drags or won’t close fully. Hinge wear or post movement is the cause. A sagging gate stresses the opener motor and will eventually tear the mounting brackets off the post.
- Remote or keypad works intermittently. Intermittent failures are almost always an early warning sign of receiver board or wiring failure. Waiting until it dies completely leaves you locked out or stuck outside.
- Visible cracks in welds or rust at the joints. Rust never stops on its own. By the time you see flaking, the steel underneath is already losing thickness. A failed weld on a heavy gate is a serious safety hazard.
Our Gate Repair Process - Step by Step
- 1
You call, a person answers. Day or night, a live person picks up the phone. We ask what the gate is doing, what brand it is, and when you need it fixed. No menus, no callbacks.
- 2
We diagnose before we quote. Our tech arrives, inspects the gate, the motor, the hinges, and the wiring. We run load tests on the motor, check amperage draw, and verify every limit and safety sensor. Then we tell you exactly what’s wrong and what it will cost.
- 3
Price agreed, work begins. The quote is the price. We write it down, you approve it, and only then does a single bolt get turned. No change orders, no surprise line items on the invoice.
- 4
We fix it right, that same visit. Most gate repairs are completed in one trip. We carry the common parts for DoorKing, Elite, Ghost Controls, Mighty Mule, and other major brands on the truck. If a part isn’t on hand, we’ll tell you before we start.
- 5
We test it and stand behind it. Before we leave, the gate runs through full open and close cycles, the sensors are verified, and the safety edges are checked. Every job is covered by our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right.
How Much Does Gate Repair Cost in San Fernando?
A typical our Gate Repair in San Fernando runs between $180 and $750, depending on what failed. Here’s what homeowners can expect based on the most common repairs we handle:
- Hinge or weld repair: $150 to $350, depending on the number of hinges and the extent of the welding
- Gate realignment and adjustment: $120 to $280, including track and closer adjustments
- Limit switch or sensor replacement: $140 to $320 per switch or sensor
- Control board replacement: $260 to $650, depending on the brand and model
- Motor replacement: $450 to $950, including labor and setup
- Full gate restoration (welds, rust repair, realignment, paint matching): $600 to $1,500+, quoted per job
What changes the price: the brand of your opener, whether parts are in stock locally, and how much rust or structural damage we find once we dig in. The only way to know for sure is to have the gate looked at. We offer free estimates on all gate repair work in San Fernando, and the price you approve before we start is the price you pay when the job is done. That’s the square deal we’ve worked under since 1984.
Gate Repair Near San Fernando - Our Service Area
Ironworks Gate Co. serves San Fernando and the surrounding Valley communities, including Sylmar, Santa Clarita, Panorama City, Granada Hills, Sun Valley, Northridge, Van Nuys, Porter Ranch, and Reseda. Most San Fernando calls get a same-day or next-day visit. If you’re in one of the surrounding neighborhoods, you can read more about our work on our Gate Repair in Sylmar page or our Gate Repair in Santa Clarita page. Wherever you are, the same 42 years of experience and the same written guarantee apply.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in San Fernando
Gate repair covers any work that restores a driveway or estate gate to safe, proper operation. That includes fixing motors and openers, replacing hinges and locks, realigning a sagging gate, and welding cracks or rust damage. It’s everything from the steel to the sensors.
Most gate repairs in San Fernando are completed in one to two hours on the first visit. If we need to fabricate a custom part or order an uncommon board, we’ll tell you that upfront and schedule the follow-up. You’ll know the timeline before we start.
Most repairs fall between $180 and $750, with more involved structural work running higher. We provide a written, upfront price before any work begins, and our estimates are free. Call (925) 307-8328 and we’ll give you an exact quote for your gate.
Yes. We repair DoorKing operators regularly and typically stock the common control boards, limit switches, and loop detectors for their swing and slide models. If you have a DoorKing that’s acting up, there’s a good chance we can fix it in one visit.
In most cases, yes. We prioritize Emergency Gate Repair in San Fernando, CA for gates that won’t open or won’t close, because that’s a security problem, not just an inconvenience. Call (925) 307-8328 and a live person will tell you exactly when we can be there.
Every repair we complete is covered by our 90-Day Done Right Promise. It’s a written guarantee. If something isn’t right within 90 days of the repair, we come back and make it right. No paperwork, no arguing.
Clear the area around the gate so our technician has room to work, and make sure we can access the opener’s power source and any control panels. If you know the brand and model of your opener, keep that handy. That’s it. We’ll handle the rest.
Schedule Your Gate Repair Service in San Fernando Today
If your gate is acting up, don’t wait for the problem to get worse. Call Ironworks Gate Co. at (925) 307-8328 for a no-obligation estimate. We answer live, 24 hours a day, 7 days a week. The price is agreed before work starts, and every repair is backed by our 90-Day Done Right Promise in writing. One call, one visit, done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving San Fernando homeowners since 1984.