Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Granada Hills
Gate installation in Granada Hills runs $2,400 to $8,500 for a typical residential driveway gate, depending on whether you’re looking at a single swing gate on the valley floor or a heavy-duty slide gate on a horse property north of Rinaldi. Most installations take one to two days on site once materials and permits are squared away. Ironworks Gate Co. has been putting gates in across Granada Hills for long enough to know that the 91344 hillside demands something different than the flat streets of 91394. Call (925) 307-8328 for a free on-site measure and a written price before any work begins.
Why Ironworks Gate Co. Is Granada Hills’s Preferred Gate Installation Company
We’re the gate company Granada Hills homeowners call when the job has to hold up to Santa Ana winds, a 30-year-old post-Northridge footing, and a horse trailer backing through twice a day. Victor Salinas started Ironworks Gate Co. with a simple rule: build it like it’s staying for forty years, and stand behind it in writing. That’s why every job carries our 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.
Our technicians know the difference between a 1950s ranch tract home off Balboa Boulevard and an equestrian property up near the Santa Susana foothills, because they work both every week. We answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail. Not a callback queue. You call, a person answers, and we get you scheduled. That matters when your gate is stuck open and your horses are looking at the road.
Our Gate Installation Services in Granada Hills
Driveway Gate Installation
Most Granada Hills driveway gates on the valley floor are ornamental wrought iron or welded steel, mounted into masonry pilasters that have been sitting there since the Eisenhower administration. We measure the opening, check the pilaster condition, and set new posts in concrete footings rated for the gate’s weight and swing. If your existing pilasters are cracked from the 1994 quake or just tired, we’ll tell you straight before we hang anything on them. A typical single driveway gate in Granada Hills runs $2,400 to $4,800 installed.
Pedestrian Gate Installation
Pedestrian gates in Granada Hills get used harder than anyone plans for. Kids, deliveries, gardeners, pool service. We build them to swing true year after year, with heavy-duty hinges and a latch that doesn’t sag. If you’re pairing a pedestrian gate with a driveway gate, we’ll match the metalwork so the whole front of the property reads as one piece. Budget $950 to $2,200 for a standard welded steel pedestrian gate installed in Granada Hills, more if it’s custom ornamental work.
Sliding Gate Installation
On Granada Hills hillside lots, a sliding gate is often the only real answer. A swing gate on an 8% grade fights gravity every time it moves, and the wind up near the foothills will twist a wide double gate like a soda can. A slide gate rides on a track and carries its weight on rollers, which is far kinder to the operator and the hardware. We do a lot of Viking rack-and-pinion slide gates up north of Rinaldi, because they handle grades and gravel aprons without complaint. Expect $3,800 to $8,500 for a slide gate installation in Granada Hills, depending on gate length, track work, and automation.
Swing Gate Installation
On flat Granada Hills streets, a swing gate is still the classic look: two leaves meeting in the middle, ornamental iron or powder-coated steel, opening inward or outward depending on the driveway pitch and setback. We size the operator for the load, not the brochure. A double swing gate on a Granada Hills ranch home typically runs $3,200 to $6,800 installed with automation. Single swing gates come in lower. We quote it before we touch a bolt, so there are no surprises on the bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Granada Hills
Our Gate Installation team is trained and equipped on nine gate-automation brands, including DoorKing, Viking, and Ghost Controls, which we see constantly across Granada Hills. That means if you’ve got an older Linear operator on a ranch gate or a Ghost Controls unit on a newer pedestrian gate, we know the wiring, the programming, and the failure points before we arrive. For Granada Hills customers specifically, we keep common slide-gate and solar-operator parts on our trucks, because driving back down the 405 for a bracket isn’t acceptable when your gate is hanging open. Most jobs wrap up in a single visit.
Common Gate Installation Problems We See in Granada Hills Homes
- Post-Northridge footings failing under new loads. A lot of gate posts and pilasters in Granada Hills went in during the mid-1990s rebuilding surge, and the concrete isn’t what it used to be. When we hang a heavier gate on an old footing, we check for cracks and movement first. Sometimes the right move is a new footing, not a new gate.
- Santa Ana wind torture on wide gates. Wind accelerates down from the Santa Susana Mountains and hits north Granada Hills hard. Wide farm-style swing gates act like sails, pulling hinge post anchors out of the ground over time. We spec heavier posts, deeper footings, and sometimes a slide gate instead of a swing gate for wind-exposed lots.
- Flat-grade operators dying on hillside driveways. Operators sized for a flat Valley driveway overheat and strip rack teeth on a 5 to 10 percent grade. We see it constantly north of Rinaldi. The fix is an operator sized for the actual grade and gate weight, not whatever was on sale at the big box store.
- Solar installs done without battery reserve. Solar gate openers are the right call on many Granada Hills horse properties where running mains to the gate is impractical. But solar without battery backup means a cloudy week leaves your gate dead. We always include battery reserve on solar installs.
Pricing for Gate Installation in Granada Hills, CA
A straight single driveway gate on a flat Granada Hills lot runs $2,400 to $4,800 installed. A double swing gate with automation is $3,200 to $6,800. Slide gates, which we recommend for hillside and equestrian lots, run $3,800 to $8,500 depending on length, track work, and operator load. Solar adds $500 to $1,200 depending on panel size and battery capacity. What moves the price is gate weight, grade, wind exposure, and whether the existing posts are fit to reuse. Every quote is written, itemized, and agreed before work starts. We don’t hand you a number after the concrete is poured. Call (925) 307-8328 for a free estimate, and ask about the 5% senior and veteran discount that always applies.
We Also Serve Cities Near Granada Hills
While this page is focused on Granada Hills, our crews regularly install gates in Northridge, Porter Ranch, San Fernando, and Panorama City. If you’re on the edge of Granada Hills or just over the line, call and ask. We’ll tell you straight whether we serve your street, and when we can get there. The same pricing, the same promise, the same crew.
Serving Granada Hills, CA - Our Local Coverage Area
We’re based in the Granada Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Granada Hills
Operators on Granada Hills hillside driveways burn out faster because many were sized for flat-grade use, and the motor ends up working against gravity on every cycle. As the gate and track age, friction builds, the load increases, and the motor overheats. On a 5 to 10 percent grade, that’s a slow death. We size operators for the actual grade and gate weight, not the spec sheet’s best case. Call (925) 307-8328 and we’ll measure it properly.
Yes. On a Granada Hills horse property with a long, unpaved driveway, a heavy-duty slide gate is almost always the better choice. Unpaved aprons and grades make swing gates labor and alignment a constant fight. A slide gate rides on its own track and handles gravel, dirt, and uneven ground far better. Recently we installed a Viking R6 rack-and-pinion slide gate at an equestrian property off Rinaldi Street where the driveway’s 8% grade and unpaved apron had already burned out two flat-grade operators. We set a new post footing, added a safety photocell pair to meet UL 325, and wired a solar opener with battery backup because running mains to the far gate wasn’t practical. That’s the norm up there, not the exception.
Santa Ana winds in Granada Hills hit wide gates hard, especially swing gates with a lot of surface area. The wind loads twist frames, stress hinges, and pull post anchors out of aging concrete. We spec heavier posts, deeper footings, and in the worst wind corridors we steer customers toward slide gates instead of wide swing gates. The wind is a real engineering factor, not an afterthought. If your gate already leans or rattles in the wind, call (925) 307-8328 before it gets worse.
Yes, but the panel placement matters. On a shaded Granada Hills driveway, a solar gate opener needs either a larger panel or a remote panel mounted where it actually gets sun, wired back to the operator. We’ve done installs where the gate sits under oaks and the panel goes 60 feet up the driveway on a post in full sun. Battery backup is non-negotiable in that setup, because shaded days happen. We’ll walk the property and tell you what’s workable before you spend a dime.
UL 325 entrapment protection matters more on Granada Hills gates with horse trailer access because the vehicles and loads are irregular, and a gate that reverses mid-cycle on a horse trailer is a real safety issue. Loop detectors on unpaved equestrian driveways also false-trigger from metal trailers or fail from crushed conduit, leaving gates stuck. We install safety photocell pairs and edge sensors as standard on any automated gate, and on equestrian properties we take extra care with detector placement and conduit protection. This is not the place to cut corners. Call (925) 307-8328 for an honest assessment, free.
Get a Free Estimate for Gate Installation in Granada Hills
If you’re in Granada Hills and you’re tired of a gate that doesn’t close right, an operator that’s died one too many times, or an opening that’s been waiting for a proper gate for years, call Ironworks Gate Co. at (925) 307-8328. We’ll schedule a free measure, give you a written price, and answer every question like you’re standing in our shop. A live person answers, day or night. The 90-Day Done Right Promise applies to every install. The price is agreed before work starts. That’s the deal, and we stand behind it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Granada Hills gate installation and repair with the Keystone Standard.