Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Northridge
Gate parts and welding in Northridge usually means one of three jobs: a hinge that snapped, a post that’s leaning, or a weld that finally let go after thirty years of San Fernando Valley heat. We handle all three, plus Gate Installation - Northridge, rail repairs, custom brackets, gate rollers, and latch work, for homes throughout 91324, 91325, and 91327. Ironworks Gate Co. has been welding and repairing driveway gates since 1984, and our crews know Northridge’s specific gate failures better than any generalist shop. Call (925) 307-8328 and you’ll reach a live person who can schedule a Northridge visit fast. We quote the price up front, before any work starts, and every job carries our written 90-Day Done Right Promise.
Why Ironworks Gate Co. Is Northridge’s Preferred Gate Parts & Welding Company
Northridge homeowners tend to keep their gates for decades, not years. That means the hardware we service spans three or four generations of design: early Apollo screw-drive operators, first-wave Linear swing arms from the 1990s, and newer LiftMaster slide motors. A technician who only knows current models gets lost fast. Our team works on nine major automation brands and welds everything from square-tube steel to ornamental iron, so the job is done right whether the gate is forty years old or four. We’re the Gate Parts & Welding crew that handles the repairs other companies walk away from.
Northridge customers also remember the last contractor who overpromised. That’s why our pricing is settled on paper before a single bolt is turned. No discovery fees, no “while we’re here” add-ons. And because we stand behind the work with the 90-Day Done Right Promise, if something isn’t right, we come back and make it right. No arguing about it. Victor Salinas built this company on that principle, and every technician carries it into Northridge driveways week after week.
Response time matters when a gate won’t close and the driveway is the only thing between the street and your backyard. We serve Northridge regularly, with crews scheduled from our Los Angeles office, so we’re on site faster than shops that have to drive over the hill twice a day. A live person answers our phones 24 hours a day, 7 days a week. Not an answering service. A human who can tell you when the truck will arrive.
Our Gate Parts & Welding Services in Northridge
Hinge Replacement
Northridge swing gates take a beating from Santa Ana wind events that shove hard against wide panels and concentrate stress at the hinge post. We regularly replace sagging or sheared hinge brackets on gates across the 91324 and 91325 zip codes. If the gate is still structurally sound, we cut off the old hinge, weld a new one in phase with the post, and set the weight so it swings without dragging. A typical Northridge hinge replacement runs $185 to $420 depending on gate weight and whether the post itself needs correction.
Post Replacement
This is where Northridge’s 1994 earthquake history shows up on almost every street. Concrete masonry unit pilasters built or rebuilt after the quake have been settling for thirty years, and many have tilted two to three degrees out of plumb. A tilted post racks the gate frame, binds the latch, and drags the drive wheel. We remove and replace the post, set the new footing properly, and weld the gate hardware back into alignment. Post replacement in Northridge typically costs $450 to $1,100 depending on the depth of the old footing and whether the adjacent wall needs tie-in work.
Rail Repair
Sliding gates on Northridge ranch-style lots often run on steel box rails or V-track laid during the post-quake rebuild wave of 1994 to 2000. That hardware is now 25 to 30 years old. Summer heat expands the steel, which throws limit switches out of calibration and causes binding at the end of travel. We repair or replace worn rails, re-align the track to the operator, and reset the limits so the gate stops where it should. Expect $220 to $480 for a typical rail repair on a Northridge slide gate.
Custom Welding
Some gates were never designed for automation. A homeowner adds an opener five years after the gate went in, then the bracket cracks because the original weld was meant for manual use only. We weld custom brackets, extend gate panels, build mounting plates for solar panels on remote gateposts, and reinforce the hinge points on wide farm-style gates. Custom welding in Northridge starts around $150 for small bracket repairs and runs to $800 or more for full reinforcement of a two-car-wide swing gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Northridge
We’re certified on nine opener brands for Northridge Gate Motor & Opener service, including FAAC, BFT, Linear, and Viking, and we keep common parts for those systems stocked so we’re not waiting on a distributor when you need the gate working today. Whatever brand is on your driveway, the correct fix happens on the first visit. That matters in Northridge, where post-1994 installs run the gamut from 1990s Linear swing arms to modern FAAC hydraulic operators, and a tech who knows only one brand leaves you with a gate that still fails on the next hot afternoon.
Common Gate Parts & Welding Problems We See in Northridge Homes
- Tilted pilasters from post-1994 settling. The CMU post that the gate hinges bolt to has been micro-settling for 30 years. The gate itself is fine, but the two-degree tilt racks the frame and binds the latch or drags the drive wheel.
- Thermal expansion on steel slide tracks. Summer temperatures of 108 to 112 degrees on the Valley floor expand the rail enough that limit switches drift out of calibration season to season. A gate that opened fine in March drags to a stop by July.
- Santa Ana hinge damage on wide gates. Sudden lateral wind loads on a 14- or 16-foot swing panel shear hinge bolts or bend the hinge post. We see this most on properties with open exposure near Porter Ranch and the northern edge of Northridge.
- Worn gate rollers and drive wheels. Post-quake slide gates often run on rollers that are now decades old. Flat spots on the wheel cause the gate to shudder mid-travel and trip the safety photocell, which thinks the gate hit an obstruction.
Pricing for Gate Parts & Welding in Northridge, CA
What you pay in Northridge depends on what’s actually failed, and we walk you through it before anything gets welded. Here’s what our customers in the 91324, 91325, and 91327 areas typically see:
- Hinge replacement: $185 to $420
- Post replacement: $450 to $1,100
- Rail repair or replacement: $220 to $480
- Custom welding (brackets, mounts, reinforcement): $150 to $800
- Gate roller or drive wheel replacement: $140 to $320
- Latch and lock repair or replacement: $120 to $350
Northridge costs track slightly higher than Reseda or Winnetka because of the older post-quake hardware that often needs additional correction work before new parts will fit. The estimate is free, it’s written down, and the price we quote is the price you pay. We also honor a standing $50 discount on any repair over $250 and a 5% senior and veteran discount, always. Call (925) 307-8328 to schedule a free estimate.
We Also Serve Cities Near Northridge
We regularly serve Gate Parts & Welding in Northridge and the surrounding communities, including Reseda, Winnetka, Granada Hills, and Porter Ranch. If you’re in one of those neighborhoods and your gate is dragging, binding, or won’t close, call the same number: (925) 307-8328. We’ll send a technician who knows your area’s gate history.
Serving Northridge, CA - Our Local Coverage Area
We’re based in the Northridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Northridge
In most Northridge cases, the operator is fine. The problem is the track or the gate post. Post-1994 CMU pilasters continue to micro-settle, and a two or three degree tilt out of plumb racks the gate frame so it drags the drive wheel regardless of how new the operator is. We correct the post alignment or weld the rack mount to match the post angle, then replace any worn rollers. Call (925) 307-8328 and we’ll diagnose it on the first visit.
Yes. We weld a custom bracket plate onto the gate frame and post, mount the solar panel and battery box, and wire the operator to run off the panel. For Northridge’s long, flat, sunny lots, solar is practical even where the gate sits far from the house panel. We do this regularly on acreage-style properties north of Devonshire Street.
Usually not. If the gate panel itself is square and the welds at the hinge points are still sound, we replace the post and re-hang the existing gate. Northridge wind damage typically bends the post or shears hinge bolts rather than destroying the whole panel. You’ll get the gate back on the original hinges, with the post straightened or replaced and the frame re-aligned. We quote the post work separately from any hinge hardware, so you pay for what actually failed.
We cut the rack loose from the gate, weld a new mounting plate at the corrected angle, and re-attach the rack so it runs true against the drive pinion. In Northridge specifically, the underlying cause is usually the pilaster tilting from long-term settlement, not a failed weld. If we don’t address the post angle, the rack will pull away again in a year or two. We fix both in one visit and stand behind it with the 90-Day Done Right Promise.
Automatic gates in Northridge must have two independent entrapment protection devices per UL 325, typically a pair of photo eyes or a photo eye plus a reversing edge. Wire to a gate that lacks both is a serious crush hazard, especially on wide drive gates where a car or a person can be caught between the gate and a post. We check the protection devices on every gate we service, and if they’re missing, we install Gate Access Control in Northridge equipment before the operator is reactivated. Call (925) 307-8328 for an inspection and a written quote.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Northridge and the surrounding San Fernando Valley since 1984.