Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Fernando
A new driveway gate in San Fernando typically runs $2,800 to $7,500 installed, depending on the gate style, size, and whether you’re adding automation. Most installations take one to two days on site, and we quote the full price upfront before any work begins. If you’re calling from anywhere in San Fernando, a live person answers at (925) 307-8328 and we can usually have a technician at your home the same week, often within 48 hours.
We know San Fernando’s gates because we’ve worked on the old ones for decades. The city’s residential blocks are dense, the homes are mostly 1940s through 1960s construction, and many of those original wrought iron and tubular steel gates are still hanging. Some are worth saving. Some should be replaced. Knowing which is which is the whole job.
Why Ironworks Gate Co. Is San Fernando’s Preferred Gate Installation Company
San Fernando is a city of older homes, and that means older gates. We’ve pulled more than a few 1960s swing gates off crumbling CMU block walls near Kalisher Street and around San Fernando Recreation Park. What we find is usually the same: the steel is salvageable but the post is not. A lot of companies will swap the hardware and call it done. We check the post first. In San Fernando, that one step is the difference between a gate that works for twenty years and one that sags again by next spring.
Victor Salinas, who leads Ironworks Gate Co., has spent 42 years in this trade. He built the company in 1984, and he runs it with one rule: the 400th job gets the same care as the first. That means background-checked, uniformed technicians on every visit. It means a written 90-Day Done Right Promise on every completed job. And it means a live person answers the phone 24 hours a day, seven days a week. No voicemail trees. No answering service. You call, we answer.
We coordinate dispatch from our Los Angeles office, and our crews work locally throughout San Fernando. If you’re near Hubbard Street or Lopez Avenue, we’re not far. We show up when we say we will. We quote the price before we start. And if something isn’t right ninety days later, we come back and make it right. No paperwork. No arguing. That’s the Keystone Standard, applied to every gate we hang in San Fernando.
Our Gate Installation Services in San Fernando
We don’t do fences. We don’t do landscaping. We install gates, and we’ve been doing it long enough to know that San Fernando’s older lots and block walls make every job a little different. Here’s what we handle most often in this city.
Driveway Gate Installation
A driveway gate on a small San Fernando lot is usually a swing gate, because the driveways are short and there’s no room for a slide track. We measure the driveway width, check the grade, and look at what’s behind the block wall before recommending anything. Most new driveway gates in San Fernando run $3,200 to $6,800 with automation included.
Pedestrian Gate Installation
Pedestrian gates in San Fernando take a beating. They’re the gate that gets used ten times a day, and on older homes they’re often the original 1960s unit with a worn latch and cracked welds. A new steel pedestrian gate with a quality closer runs $800 to $1,600 installed. We match the style to the existing block wall and the main driveway gate so the whole property reads as one job.
Sliding Gate Installation
Sliding gates are less common in San Fernando’s dense neighborhoods because they need a clean horizontal run along the wall line, but if your driveway is wide or steep, a slide gate can be the right answer. A cantilever slide with a rack and pinion drive runs $4,500 to $9,000 installed depending on the span. We handle the full power run, the safety photocells, and the concrete work.
Swing Gate Installation
Most gates in San Fernando are swing gates. The single most important part of hanging one here is the post. San Fernando’s block walls have moved over the decades, and a post that was plumb in 1965 may be leaning today. We check every post with a level before we hang anything. If the post is moving, new hinges won’t save the gate. We set a new footing at proper depth and start clean.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Fernando
We’re trained and equipped on nine major gate automation brands, and in San Fernando the ones we see most are FAAC, Linear, and BFT. Older FAAC boards on 1990s installations are common here. Linear swing operators from the 2000s are everywhere. BFT shows up on newer estates and some commercial properties. Whatever is on your driveway, we know the wiring, the control board, and the failure points. If a part is needed, we stock the common ones and order the rest fast. You won’t wait weeks while your gate stays open.
Common Gate Installation Problems We See in San Fernando Homes
San Fernando’s housing stock predates modern gate safety standards by a long shot. Bring us a 1962 swing gate and we already know what we’re going to find.
- Out-of-plumb posts on block walls. The 1971 San Fernando earthquake and the 1994 Northridge quake both moved ground under this city. Hinge posts set in block walls are often leaning, and a gate hung on those posts will never hang right. We check alignment first, always.
- Obsolete control boards lacking modern entrapment protection. Older operators don’t meet current UL 325 safety standards. You can’t just swap a board and call it done. The whole system needs reverse sensors and photocells to be genuinely safe.
- Thermal warping from Valley heat. San Fernando summers push past 100°F regularly. A steel gate frame expands in that heat, and if it was hung without clearance, it binds against the post or the ground in August. We hang gates with thermal movement in mind from the start.
- Hard water and rust. San Fernando’s hard water gets used heavily for irrigation, and overspray on a gate accelerates rust on anything uncoated. We spec powder-coated steel and sealed hardware on new installations here.
Pricing for Gate Installation in San Fernando, CA
Here are real numbers for the San Fernando market, not vague ranges. A basic pedestrian gate runs $800 to $1,600. A single swing driveway gate with manual hardware is $1,800 to $3,200. Add automation and you’re at $2,800 to $5,500 for a single swing, and $5,000 to $8,000 for a double swing. A slide gate with operators runs $4,500 to $9,000. Security gates with intercom, keypad, and camera integration start around $5,500 and go up from there.
- Pedestrian gate: $800-$1,600
- Single swing driveway gate, no automation: $1,800-$3,200
- Single swing with operator: $2,800-$5,500
- Double swing with operator: $5,000-$8,000
- Sliding gate with rack and pinion: $4,500-$9,000
- Security gate with access control: $5,500+
The price you’re quoted is the price you pay. We don’t pad the invoice after the fact. A square deal means the number doesn’t move. Call (925) 307-8328 and we’ll give you a free estimate before any work starts.
We Also Serve Cities Near San Fernando
We work throughout the northeast Valley. If you’re in Sylmar, Panorama City, Granada Hills, or Sun Valley, the same crews that handle Gate Installation in San Fernando can help you. And if you’re closer to downtown, see our San Fernando page for local specifics.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in San Fernando
Set a 4-foot level against the post. If it’s off plumb by more than a quarter inch over the length, the post is moving and new hinges will only delay the problem. In San Fernando, seismic settling has left many block wall posts leaning. We check post plumb on every call before recommending anything. If you’re not sure, call (925) 307-8328 and we’ll check it in person.
Sometimes. If the motor and gearbox are still sound, we can add current UL 325 compliant photocells and reverse sensors to an older swing operator. But if the control board is obsolete, a retrofit often costs close to half the price of a new operator, and the old mechanicals will fail eventually anyway. We’ll show you the numbers on both options and you decide.
Because the block wall itself is moving. San Fernando sits on ground that’s been through two major earthquakes in the last 54 years, and many older CMU walls have settled unevenly. When the wall shifts, the hinge bolts carry strain they weren’t designed for. We fix this by resetting the post in a proper footing or adding a steel post reinforcement plate. Tightening the bolts again won’t do it.
A slide gate is the gate panel itself, moving horizontally. A rack and pinion is the drive mechanism: a steel gear rack bolted to the gate meshes with a motorized pinion gear. Slide gates can use chain drives or rack and pinion. For San Fernando’s narrower lots, a swing gate is usually more practical. But if you have the wall length for a slide, rack and pinion is the smoother, quieter option. Most installs of that type run $4,500 to $9,000.
Yes, and in San Fernando it’s often the better choice for single swing gates where running conduit to the gate would mean cutting through an old concrete driveway. We get strong sun year-round here, and a properly sized solar panel paired with a FAAC or Linear operator handles daily cycles without issue. The upfront cost is a few hundred dollars more than a hardwired run, but you save the trenching.
Call (925) 307-8328 now for a free estimate on any gate installation in San Fernando. We’ll answer your questions, schedule a visit, and give you a written price before anything gets built.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving San Fernando and the northeast Valley for over 42 years.