Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Van Nuys, CA
When a driveway gate stops opening in Van Nuys, you don’t have time to wait through a voicemail tree. You call, a live person answers, and a technician who knows Valley heat and 1980s wrought iron shows up ready to work. That’s how we operate. Ironworks Gate Co. handles gate repair, gate installation, motor and opener work, access control, and parts and welding for homeowners across Van Nuys, 91401 through 91405. One call to (925) 307-8328 gets a straight answer and a square price before any bolt gets turned.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Van Nuys Homeowners Choose Ironworks Gate Co.
Homeowners in Valley Glen and the streets around Van Nuys Boulevard have been through enough fly-by-night repair crews to recognize the difference. Our technicians show up in uniform, background-checked, and they carry parts for the openers Van Nuys actually has on its driveways: FAAC, BFT, Linear, and Viking among them. Most jobs get finished in a single visit because the van is stocked for the work before it leaves the yard.
What seems to matter most to the folks we serve near Victory Boulevard and around Sepulveda Basin is the written 90-Day Done Right Promise. If something isn’t right after we leave, we come back and make it right. No paperwork, no arguing, no “that’s normal wear.” Victor Salinas, who runs Ironworks Gate Co., set that standard because a gate that won’t close is a gate that won’t protect anything.
And when a gate fails on a Sunday afternoon with the car trapped inside, you reach a person on the phone. Not a recording. Twenty-four hours a day, seven days a week.
Gate Repair Services We Offer in Van Nuys
Gate Repair
A sagging hinge on a Van Nuys driveway gate isn’t just a squeak, it’s the beginning of a weld failure or a track misalignment that will only get worse in the Valley heat. We repair wrought iron, steel, wood, and chain-link gates, from broken welds to seized rollers to posts that have shifted in their footings.
Learn more about our Gate Repair in Van Nuys.
Gate Installation
Whether you’re replacing a 35-year-old gate that has rusted through at the bottom rail or putting in a new automatic gate for the first time, we measure, order, and install to fit the exact opening, not a “close enough” standard size. Van Nuys driveways vary from narrow 1950s single-car cuts to wide double-gate estate entries, and each one deserves its own plan.
Learn more about our Gate Installation in Van Nuys.
Gate Motor & Opener
Thermal cutoff shutdowns on a 108°F summer afternoon are a Van Nuys specialty, and we carry the capacitors and contactors to fix them on the spot. We service and replace automation on FAAC, BFT, Linear, Viking, LiftMaster, and more, and we’ll diagnose the motor rather than guess at it.
Learn more about our Gate Motor & Opener in Van Nuys.
Gate Access Control
Keypads that have baked in direct sun, intercom wires chewed through by Valley rodents, remotes that work only from three feet away: these are daily Van Nuys service calls for us. We install and repair keypads, telephone entry, loop detectors, and remote systems, and we’ll show you how to use whatever we install before we leave.
As part of our home services, gate access control is handled by the same technicians who do the welding and the motor work, so one crew owns the whole job.
Gate Parts & Welding
A broken hinge bracket or a rusted-through bottom rail doesn’t always mean a new gate. We fabricate and weld replacement parts for gates that were installed three decades ago, matching the metal and the finish so the repair doesn’t look like a patch. When the existing gate is worth saving, we save it.
Neighborhoods We Serve in Van Nuys
We work throughout Van Nuys, from the apartment corridors along Van Nuys Boulevard to the residential streets of Valley Glen, the townhome communities near the Sepulveda Basin, and the older ranch-home blocks around Victory Boulevard and Sherman Way. We also regularly serve the pockets between Hazeltine Avenue and Woodman Avenue.
- Valley Glen
- Sepulveda Basin area
- Van Nuys Boulevard corridor
- Victory Boulevard and Hazeltine Avenue
Typical response time across Van Nuys is the same day for repair calls, with many emergencies handled within a few hours.
Why Van Nuys’s Climate & Housing Affect Gate Repair
Van Nuys sits in the thermal core of the San Fernando Valley, where summer temperatures routinely hit 108 to 112 degrees, consistently 15 to 20 degrees hotter than coastal Los Angeles. That heat does two things to gates. First, it warps wood driveway gates off their posts within a few seasons of direct sun. Second, it causes metal sliding-gate tracks to thermally expand and bind automated openers in ways that coastal repair companies rarely see.
Add to that the housing stock: Van Nuys is dominated by post-WWII stucco ranch homes and 1960s and 1970s apartment complexes, most of which added ornamental wrought-iron driveway and pedestrian gates during the 1980s and 1990s security-upgrade era. Those gates are now 30 to 40 years old, and the wiring behind them often predates the UL-325 safety standards of 1993. What that means day to day: pre-UL-325 junctions and non-weatherproofed motor housings failing rapidly under Valley heat conditions, and a concentrated wave of end-of-life hardware failures across the 91401, 91404, and 91405 ZIP codes. We see it every week.
Pricing for Gate Repair in Van Nuys
What should a gate repair cost in Van Nuys? For reference, here’s what we quote on common jobs:
- Hinge or weld repair: $180 to $420, depending on the number of hinges and accessibility
- Track realignment or roller replacement: $220 to $480 per gate section
- Motor capacitor or limit-switch replacement: $190 to $390, including parts
- Keypad or receiver replacement: $240 to $550, depending on the system
- Full gate replacement (single, standard driveway): $2,800 to $7,500 installed
Every price is quoted and agreed before work starts. You’ll know the number before we begin, and that’s the number on the invoice. Standing offers apply: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Service Area, Cities Near Van Nuys
Ironworks Gate Co. serves Van Nuys and the surrounding communities. If you’re in Panorama City, North Hollywood, Sun Valley, or Reseda, we cover those areas as well, with crews dispatched from our Los Angeles office to reach Van Nuys locally.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Van Nuys
Most gate repairs in Van Nuys run between $180 and $550, depending on whether the issue is a hinge, track, motor component, or access-control keypad. A full gate replacement starts around $2,800. The exact price is quoted and agreed before any work begins, so there are no surprises on the bill. Call (925) 307-8328 for a free estimate on your specific gate.
For repair and emergency calls in Van Nuys, yes, same-day service is our standard, and we carry parts for the opener brands common in the Valley, so most jobs are completed in one visit. If your gate is stuck open, stuck closed, or the motor is making noise and not moving, call us now at (925) 307-8328.
Yes, we service and repair FAAC, BFT, Linear, and Viking openers, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are trained on all nine major brands, which means the correct fix usually happens on the first visit, not the third. For a same-day FAAC or Viking repair in Van Nuys, call (925) 307-8328.
Van Nuys sits in the hottest part of the San Fernando Valley, where summer afternoons regularly exceed 108°F. Automated gate motors on Valley apartment complexes commonly overheat and trigger thermal-cutoff shutdowns during peak heat, especially when motor housings were installed decades ago without weatherproofing. Our technicians carry spare motor capacitors and shade tarps as standard van inventory for exactly these Van Nuys calls. If your gate stopped working on a hot afternoon, call (925) 307-8328 and we’ll diagnose it.
A full gate installation includes measuring the opening, fabricating or ordering the gate to fit, setting or replacing posts as needed, mounting and calibrating the opener (if automated), wiring the keypad or access control, and testing safety edges and force settings. Because Van Nuys has many pre-UL-325 installations, we also check the existing wiring and bring it up to current safety standards where possible. For a free measure and written quote, call (925) 307-8328.
Done right, and backed in writing. Call Ironworks Gate Co. at (925) 307-8328 for gate repair in Van Nuys, from a stuck hinge to a full automation system. A live person answers, 24 hours a day, and we’ll give you a straight answer and an upfront price before any work begins.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Van Nuys and the San Fernando Valley.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Van Nuys Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram