Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Van Nuys
Gate parts and welding in Van Nuys usually run between $180 and $850 depending on whether we’re replacing a hinge, splicing a cracked post, or building a custom bracket. Most hinge and roller jobs in the 91401, 91404, and 91405 ZIP codes finish in a single visit. If you’ve got a sagging gate, a seized roller, or a weld that finally let go, call us at (925) 307-8328 and a live person will answer.
Van Nuys gates take a beating that coastal gates never see. Our crews work the thermal core of the Valley every day, so we know exactly what these 108°F afternoons do to metal tracks, welded posts, and opener motors. We’re the Gate Parts & Welding team that shows up with the right steel and the right fix the first time, not the third.
Why Ironworks Gate Co. Is Van Nuys’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has been welding and repairing gates for over 42 years, founded in 1984, and the company plans to be in town for another forty. Van Nuys customers call us because the work holds up. A hinge we replace on a 1980s wrought-iron swing gate off Victory Boulevard stays square through the next several summers of thermal expansion, and through the next Santa Ana season too.
Every technician who steps onto a Van Nuys property is background-checked and uniformed. They carry the K.E.Y.S. code on every job: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. And every completed job is covered by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.
When you call, a live person answers. That’s true at 2 p.m. and at 2 a.m., seven days a week. No voicemail trees, no answering service, no waiting until Monday. For Van Nuys homeowners who have been burned by contractors before, that single fact matters more than any marketing line we could write.
Our Gate Parts & Welding Services in Van Nuys
Hinge Replacement
Hinges on Van Nuys gates fail in a particular way. The constant thermal cycling of Valley summers, where daytime highs hit 110°F and nights drop 30 degrees, works hinge pins loose and ovalizes the barrel. Add the weight of a 30-year-old wrought-iron panel and you get a gate that drags on the latch side. We replace hinges with heavy-gauge steel barrels, shim the post correctly, and re-hang the panel so it swings true. In the 91405 area, where shared driveways mean a swinging gate has to clear parked cars by inches, that precision matters.
Post Replacement
The hinge post is the true failure point on most older Van Nuys gates. Many 1980s wrought-iron gates were set into concrete footings that have since cracked from decades of thermal heaving. When the post leans, the gate sags. We cut out the old post, weld a new steel post with a proper footing, and set it plumb. We’ve done this on gates along Vanowen Street where the original footing had sheared clean through, and the gate now cycles properly even in Santa Ana gusts.
Rail Repair
Sliding-gate rail problems in Van Nuys almost always trace back to heat. Steel track sections expand on 108°F afternoons and bind the gate rollers, which then overloads the opener motor. We replace warped or kinked track sections with heat-rated steel, align the rail properly, and set the roller clearance so the gate slides freely at noon in August. For apartment complexes in 91401 and 91405 with older slide gates, this is one of the most common repairs we schedule all summer.
Custom Welding
Some gate repairs are not a part swap. A cracked ornamental scroll, a broken picket at the base of the panel, a custom bracket for an opener arm that was never designed for this gate. Our welders fabricate and finish steel so the repair blends with the original ironwork. We match the existing style where we can, and we tell you plainly when a section is too far gone to save. In Van Nuys, where those 1980s ornamental panels are now 35 to 40 years old, a skilled weld often makes more sense than a full panel replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Van Nuys
Our technicians are trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule, so the correct fix happens on the first visit, whatever is on your driveway. We keep common parts stocked for Van Nuys jobs: hinge barrels, roller assemblies, track sections, motor capacitors, and safety photocells. That means less waiting on a parts truck and more gates closing the same day we arrive. If you’re running a DoorKing operator on an apartment entry gate and the heat keeps tripping the thermal cutoff, we carry the heat-rated replacement capacitor that fixes it.
Common Gate Parts & Welding Problems We See in Van Nuys Homes
- Afternoon track binding on sliding gates. Metal track sections expand in the late-afternoon heat and bind the rollers, which makes the opener strain and eventually trip its thermal cutoff. We replace warped sections and adjust roller clearance so the gate rides free even at 110°F.
- Cracked hinge posts at the footing. Older 1950s-to-1970s concrete footings heave slightly with repeated thermal cycling. Over 30 or 40 years, the steel post shears or the concrete around it crumbles, and the gate drops. The post, not the panel, is usually the true failure point.
- Santa Ana wind damage. Every fall, strong wind events funnel through the Valley corridors and blow unsecured or weakened gates off their hinges or tracks. We see a predictable spike in emergency hinge and roller calls across 91401, 91404, and 91405 between September and November.
- Worn rollers and seized bearings. Valley dust and grit work their way into roller bearings on slide gates, especially on busy apartment entries. The gate gets loud, then gets slow, then stops. Replacing the rollers before the track gets chewed up saves a much bigger rail job later.
Pricing for Gate Parts & Welding in Van Nuys, CA
Here are the ranges you can expect for common jobs in Van Nuys:
- Hinge replacement: $180-$320 per hinge, including the steel and the labor to re-hang the panel
- Post replacement with new footing: $450-$850 depending on post height and whether we’re replacing one or both sides
- Rail repair or straightening for a sliding gate: $220-$500, more if full track sections need replacing
- Custom welding: $150-$400 for typical bracket work, scroll repair, or panel splicing
- Roller replacement: $150-$280 for a standard double-roller set on a slide gate
The price is quoted and agreed before any work starts. You will know the number before we turn a single bolt. We also offer a Free Second Opinion on Any Written Estimate, so if another company has quoted you a number, bring it to us and we’ll look it over honestly. Senior and Veteran customers receive a permanent 5% discount. Call (925) 307-8328 for a free estimate.
We Also Serve Cities Near Van Nuys
Our Van Nuys crews cover the surrounding Valley communities too. If you’re in Panorama City, North Hollywood, Sun Valley, or Reseda, the same team that welds Van Nuys gates can handle your hinge replacement, post repair, or sliding-gate fix. Same written 90-Day Done Right Promise, same live-answer phone line.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Van Nuys
Metal track sections expand as temperatures climb past 100°F, and if the original installer set the roller clearance too tight, the expanding rail pinches the rollers and the gate binds. Van Nuys sees this constantly because the Valley thermal pocket pushes summer afternoons to 108-112°F. The fix is usually a heat-rated track section with correct clearance, paired with a heat-rated motor capacitor so the opener doesn’t trip its thermal cutoff. Call (925) 307-8328 and we’ll check both the rail and the motor in one visit.
In most cases the post itself needs to come out, because the failure is in the old concrete footing underneath it, not just the steel above ground. Decades of thermal heaving crack the footing and the post leans. We cut out the damaged post, pour and set a new footing, and weld in a replacement steel post. Sometimes a minor lean can be corrected without full replacement, and we’ll tell you honestly which one you have after seeing it. Estimates are free.
Yes, and it’s a conversion we do regularly in Van Nuys where shared driveways and tight rights of way make swing gates impractical. We remove the old swing panel and hinges, set a slide track and rollers, and reconfigure or replace the operator to run the new configuration. On a shared driveway off Vanowen Street in 91405, we converted a sagging swing gate to a rack-and-pinion slide system, added a DoorKing operator with a safety photocell, and the gate now cycles without blocking any tenant parking. Call (925) 307-8328 for a written quote on a swing-to-slide conversion.
Yes, and we see a distinct spike every fall when Santa Ana winds funnel through the Valley and blow unsecured gates off hinges or tracks across 91401, 91404, and 91405. A live person answers our phone line 24/7, and we prioritize emergency gate failures because a fallen gate on a shared driveway is both a safety and a security problem. If your gate is on the ground or hanging from one hinge, call (925) 307-8328 and we’ll get a crew out to you.
Yes. Many Van Nuys apartment gates installed during the 1980s run pre-UL-325 wiring standards without the safety photocells and entrapment sensors modern codes require. We upgrade these older systems with current safety edges, photocells, and loop detectors, and we can service or replace the operator itself across all nine brands we carry, including Gate operators from DoorKing, Elite, and Mighty Mule. The upgrade brings the entry system up to current standards and keeps the HOA in compliance. Call (925) 307-8328 to schedule an assessment.
Call Ironworks Gate Co. for Gate Parts & Welding in Van Nuys
If your gate is sagging, dragging, binding in the heat, or broken at the weld, call us at (925) 307-8328. A live person answers, day or night. We’ll give you an honest assessment, a written price before any work begins, and a 90-Day Done Right Promise on every job. Van Nuys gates fail in predictable, fixable ways, and we’ve been repairing them for over 42 years. One call, one visit, done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Van Nuys and the San Fernando Valley since 1984.