Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair Services in North Hollywood, CA
If your gate is grinding against its track, refusing to close, or tripping its breaker every afternoon, you are dealing with what we see constantly across North Hollywood. The fix usually comes down to a decade or two of Valley heat and a worn-out part that finally gave up. We answer the phone around the clock, and our technicians know the gates in this neighborhood so well they can often tell you the likely problem before they even pull up. Call (925) 307-8328, and we will have someone out to look at it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why North Hollywood Homeowners Choose Ironworks Gate Co.
Victor Salinas runs Ironworks Gate Co. the way a good gate ought to run: steady, predictable, and honest. Homeowners around the NoHo Arts District and down through Valley Glen call us because they are tired of explaining the same gate problem to a different handyman every spring. Our uniformed, background-checked technicians work on driveway gates and apartment complex gate systems all over the 91601, 91602, and 91603 zip codes, serving Van Nuys, CA and surrounding neighborhoods. Most repair jobs are completed in a single visit, and every job is backed by our written 90-Day Done Right Promise. That means if something is not right, we come back and fix it. No arguing, no paperwork, no chasing us down.
Gate Repair Services We Offer in North Hollywood
Gate Repair
A dragging slide gate, a hinge that screams when the wind blows, a leaning post at the curb: these are the calls we get every single week in North Hollywood. We repair steel, iron, aluminum, and wood gates, and we do it with the welding and fabrication skill that a 1980s apartment gate usually needs after 35 years of Valley sun. Learn more about our Gate Repair in North Hollywood.

Gate Installation
A new gate is a measured, ordered, and scheduled project, never a rush job. We will come out, take precise measurements, and give you a written price for the full installation before any metal is cut. Whether you are replacing a rusted-out slide gate on a rental property or putting in a new driveway gate at a bungalow near Chandler Boulevard, we handle the whole scope. Learn more about our Gate Installation in North Hollywood.

Gate Motor & Opener
When a motor fails, it is usually because the gate itself has been slowly getting harder to move, and the motor finally burned out compensating. We can tell you whether your opener is worth repairing or whether a replacement makes more sense, and we are trained and equipped on nine major automation brands. If your LiftMaster is tripping its thermal overload in the afternoon heat, we can likely fix it in one visit. Learn more about our Gate Motor & Opener in North Hollywood.

Gate Access Control
Keypads, intercoms, telephone entry systems, and the wiring that connects them: Gate Access Control in North Hollywood is where a gate becomes a functioning security system. In North Hollywood’s apartment corridors especially, an unresponsive keypad means tenants get locked out or, worse, the gate gets propped open. We diagnose and repair the whole circuit, not just the box on the post.

Gate Parts & Welding
Sometimes the smart money is on fixing the gate you already have rather than replacing it. We weld cracked frames, fabricate replacement hinges and brackets, and source or machine the North Hollywood Gate Parts & Welding for gate systems that have been out of production for years. If your 1992 slide gate needs a bottom roller that no one stocks anymore, we will make it work.

Neighborhoods We Serve in North Hollywood
We work across North Hollywood and our Sun Valley service area, from the apartment-lined streets east of Lankershim to the older single-family blocks below Victory Boulevard. Typical response time across the area is same-day or next-day for most repairs. Common areas we serve include:
- NoHo Arts District
- Valley Glen
- Amelia Earhart Square
- East of Lankershim Blvd
- West of the 170 freeway near Victory Blvd
Why North Hollywood’s Climate & Housing Affect Gate Repair
North Hollywood sits deep in the San Fernando Valley, where July and August regularly run 10 to 15 degrees hotter than the coast, often past 105 degrees. That heat does a number on gate hardware. Operator motors sit inside steel enclosures that bake all afternoon, so thermal-overload shutdowns happen here far more often than manufacturers’ wiring diagrams anticipate. Polyurethane bottom rollers on slide gates spend decades sitting on superheated concrete, flat-spotting and cracking until the gate starts to drag and the motor strains to pull it.
Then there is the housing stock itself. North Hollywood is dense with 1950s to 1970s bungalows and two- and three-story apartment complexes along Lankershim and Victory Boulevards. Many of those buildings added sliding iron driveway gates in the late 1980s and early 1990s, when property owners were hardening their buildings against crime. That means a huge share of gates in the 91601, 91602, and 91603 zip codes are now 30-plus years old, running obsolete openers with scarce replacement parts. A repair-versus-replace conversation is a weekly event for us here, and you deserve a company that can give you a straight answer on that question.
Pricing for Gate Repair in North Hollywood
You will know the price before a single bolt is turned. We quote upfront, and the number you agree to is the number on the bill. Small fixes like limit-switch adjustments or hinge tightening often land in the low hundreds. Replacing a worn slide-gate roller or a failed circuit board typically falls in the mid-hundreds, depending on the part and the age of your system. Here is what you can generally expect:
- Service call / diagnosis: $89-$149, applied toward the repair
- Minor repairs (hinge tighten, realignment, lubrication, limit adjustment): $150-$300
- Common part replacements (rollers, brackets, sensors, safety loop, keypad wiring): $250-$650
- Opener motor replacement (parts and labor): $900-$2,400, brand and swing/slide dependent
- Full welded repair (cracked frame, broken hinge plate): $400-$1,200
Right now Ironworks Gate Co. offers $50 off any repair over $250 and a free second opinion on any written estimate. Seniors and veterans always receive a 5% discount. Call (925) 307-8328 for an exact quote, estimates are free.
Gate Access Control & Automation in North Hollywood
If your gate has a keypad, a telephone entry box at the curb, or a sensor loop cut into the driveway, that is access control, and it fails differently in North Hollywood than almost anywhere else. Wiring insulation that has sat in a Valley heat-wave cycle for twenty years gets brittle and shorts intermittently, so you get the classic “works sometimes, then not at all” behavior that drives tenants crazy. We diagnose the entire circuit, from the keypad to the operator to the safety edge, rather than swapping parts at random. A live person answers our phone 24 hours a day, seven days a week, because a gate that will not open at midnight is not a problem that can wait for Monday.
Gate Parts Replacement: The North Hollywood Roller Problem
We mentioned the bottom-roller issue earlier, but it deserves its own section because it is the signature failure in this city. A 1980s-era slide gate has a steel track bolted to the driveway and a set of nylon or polyurethane rollers underneath that carry the weight. In North Hollywood, your driveway concrete soaks up heat all afternoon and radiates it back for hours after dark. Those rollers bake, season after season, until they flat-spot. Then the gate drags, the operator pulls more amps than it is rated for, and the thermal overload trips. The gate stops halfway open. You think the motor is dead, but the motor is fine, it is a $60 roller. We see this constantly, and we fix it in one visit.
Need a repair, a second opinion, or just a straight answer about your gate? Browse our home page to see the full scope of what we do.
Service Area - Cities Near North Hollywood
Ironworks Gate Co. serves North Hollywood and the surrounding San Fernando Valley communities. If your property is a few minutes over the border, we still have you covered in Sun Valley, Van Nuys, Panorama City, and Tujunga.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Hollywood
Most North Hollywood gate repairs land between $150 and $650 for common part replacements and adjustments. Full opener motor replacements run higher, usually $900 to $2,400, depending on the brand and your gate type. You will receive a written, upfront price before work starts, with no surprises on the bill. Call (925) 307-8328 for a free estimate.
Yes, in most cases we can. Typical response time across the 91601, 91602, and 91603 zip codes is same-day or next-day for gate repairs. A live person answers the phone 24/7, so call (925) 307-8328 and we will get you on the schedule.
We do, and those are some of our most common jobs. Many apartment buildings along Lankershim and Victory Boulevards installed sliding iron gates in the 1980s and 1990s, and those operators are now obsolete. We source scarce parts, work on nine major automation brands, and give you a straight repair-versus-replace recommendation. Call (925) 307-8328 to have a technician assess yours.
Often it is not the motor itself. In North Hollywood, the most common cause is a flat-spotted bottom roller or a heat-expanded track that makes the gate drag, forcing the operator to work harder and trip its thermal overload. We diagnose the whole system, not just the box with the breaker. Call (925) 307-8328 and describe what you are seeing, and we can usually tell you the likely fix before we arrive.
Every completed job from Ironworks Gate Co. is protected by a written 90-Day Done Right Promise. If anything we repaired is not working right within 90 days, we come back and make it right at no charge. No paperwork, no arguments, no exceptions. Call (925) 307-8328, and we will stand behind our work.
Contact Ironworks Gate Co. in North Hollywood
Your gate is the first thing you touch when you leave in the morning and the last thing you trust when you come home at night. When it stops working, you need a company that picks up the phone, tells you the truth, and fixes it right the first time. Call (925) 307-8328 for a free estimate, or to simply ask a question about what your gate is doing. A live person answers, any hour of any day.
Written by Victor Salinas, Owner at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Hollywood Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah





Before
After
Before
After
Before
After