Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Reseda
Gate installation in Reseda usually costs between $2,800 and $9,500, depending on whether you’re replacing a tired 1970s sliding gate or starting fresh with a new security gate and operator. Most Reseda jobs take one to two days once materials arrive. We’ve worked block after block from Lindley Avenue to Reseda Boulevard, and we know exactly what these 1950s and 60s tract homes throw at a gate crew. If you’re standing in front of a gate that won’t close or a post that’s leaning toward the driveway, call us at (925) 307-8328 and we’ll come take a look. Quoting is free, and the price you get is the price on the invoice, agreed before we turn a single bolt.
Why Ironworks Gate Co. Is Reseda’s Preferred Gate Installation Company
We’ve been building and hanging gates for over 42 years. Most of our Reseda work comes from neighbors telling neighbors, because when a gate goes bad on a street of 1960s ranches, word travels fast. Homeowners here tend to have lived in their homes for two decades or more. They remember the last contractor who promised a one-day job and left a half-finished track in the driveway. We don’t work that way.
Victor Salinas leads our crews, and the standard he sets is simple: done right, and backed in writing. Every job gets our 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No arguing, no paperwork, no exceptions. That promise matters in Reseda because so many of these gates are hanging on posts that went through the 1994 earthquake and were never properly repaired. The work has to be done with that history in mind, or it won’t last.
Our Gate Installation Services in Reseda
We build, hang, and automate gates of every common size and style found across Reseda. Most of what we do falls into four buckets:
Driveway Gate Installation
Reseda driveways tend to run wide and flat, which means double swing gates and sliding gates dominate. We measure the opening, check the existing posts and footings, and tell you honestly whether the old posts can carry a new gate or need to be re-poured. Homes off Sherman Way and Vanowen Street often have block pillars that look fine from the curb but are cracked through the core. We catch that before any new gate goes up.
Pedestrian Gate Installation
A side gate or backyard gate gets more abuse than almost any other hardware on a Reseda property. Kids, dogs, gardeners, pool service. We hang pedestrian gates with the same steel and hardware we use on driveway gates, because a gate that sags after one summer of valley heat isn’t worth hanging at all. We cut, weld, and set these to clear properly in the dry heat, not just on the day of install.
Sliding Gate Installation
Sliding gates are everywhere west of Tampa Avenue, and most of them ride on concrete tracks poured in the 1970s. That track is usually the first thing to fail. We re-pour the track bed, set new posts, hang the gate, and mount the operator on a fresh, level run. If your old sliding gate jumps the track every August, the answer is usually not a new roller. It’s the track itself.
Swing Gate Installation
A swing gate depends entirely on its hinge post. In Reseda, many hinge posts are original to the home and were cosmetically patched after the 1994 quake. We check those first. If the post is sound, we’ll hang the gate and set the opener. If it’s leaning, we pour a new footing before the gate ever goes on. This is also where our Gate Installation team puts the most time into sag correction and proper ground clearance, because a swing gate that drags will eat its own operator within a season.
Security Gate Installation
Security gates are a growing part of our work in Reseda. Not the ornamental kind you see on gated estates farther west. Homeowners here want solid steel, a keypad, and a gate that actually closes behind them. We install security gates with loop detectors or photo-eye safety edges, wired correctly the first time. We’ll also show you how the keypad works and leave you with the manuals, not just a pile of parts boxes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
Gate operators go bad in Reseda more often than they do on the coast. The heat cooks control boards and dries out lubricants. We are trained and equipped on nine major brands, and on a typical month in Reseda we’re working on Linear, Viking, and BFT openers at least as often as anything else. Because we stock common parts locally, most Reseda operator replacements happen same week, often same visit. If you have an old DoorKing or a newer Ghost Controls unit, we service those too, and we’ll tell you when fixing the old operator is throwing good money after bad.
Common Gate Installation Problems We See in Reseda Homes
- Quake-cracked posts that were only cosmetically patched. The 1994 Northridge earthquake’s epicenter was directly beneath Reseda, along Reseda Boulevard near Saticoy Street. Three decades later, we still remove anchors from posts that were patched with mortar and paint, never reinforced, and now lean far enough to throw a gate out of square. A new gate on that post will fail.
- Cracked and lipped 1970s sliding tracks. Reseda’s interior valley heat cycles expand and contract concrete. Combined with post-1994 micro-shifts, that means original sliding gate tracks crack and lift at the seams. Rollers bind, skip, or jump. The only real fix is a track re-pour.
- Obsolete 1980s control boards. Legacy operators on some Reseda gates can’t support modern safety photocells or a keypad. Replacement boards for these units are often discontinued, and when you can find one, it costs nearly as much as a new operator. We’ll tell you that plainly.
- Sagging gates on worn hinges. A gate that drags along the concrete wears its operator out fast. In Reseda, the heat makes the problem worse because metal frames expand, hinges bind, and owners sometimes force the gate, which bends the panel. We fix the sag at the source, not just the symptom.
Pricing for Gate Installation in Reseda, CA
Here are honest numbers for what gate work costs in Reseda right now. A single swing gate made of steel, hung on existing sound posts, runs roughly $2,800 to $4,200. A double swing gate on new posts, with the concrete work that usually requires, lands between $4,500 and $7,500. Sliding gates run $3,400 to $6,800 depending on width and whether we re-pour the track. Adding an operator and keypad on top of the gate costs another $1,200 to $2,400. If you need a security gate with a welded frame and steel infill, plan for $5,000 to $9,500 installed. These are honest ranges for Reseda, not teaser prices designed to get a truck in your driveway. Your quote is written, itemized, and agreed before any work begins. We offer free second opinions on any written estimate, and seniors and veterans always get 5% off.
We Also Serve Cities Near Reseda
Our Gate Installation in Reseda crews work throughout the surrounding valley too. We regularly run jobs in Winnetka, Northridge, Porter Ranch, and Granada Hills. If you’re a few blocks over the line in any of those areas, call the same number and you’ll get the same crew and the same written guarantee.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Reseda
Because Reseda sits directly above the 1994 Northridge earthquake’s epicenter, near Reseda Boulevard and Saticoy Street. Concrete gate posts cracked during the quake, and many were only patched on the surface, never reinforced or replaced. Over thirty years of valley heat cycling and minor ground settlement, those cracks have opened back up, and the posts now lean enough to bind hinges and misalign gates. The fix is a new footing and post, not another patch. Call (925) 307-8328 and we’ll tell you whether your post can be saved or needs to be re-poured.
In most Reseda homes, no. The track under the gate is the original 1970s concrete, and decades of valley heat and post-quake movement have caused it to lip and crack so the rollers bind. New rollers might help for a month, but if the track surface isn’t flat and level, the gate will jump again. We usually re-pour the track bed and then set new rollers on a clean, level run. That’s the repair that lasts.
Yes, in many cases a swing gate operator can be retrofitted with photo-eye safety sensors and a newer keypad, but the biggest question is the condition of the hinge post. On a 1980s Reseda swing gate, the post has usually moved enough that the gate is out of square and the operator is working harder than it should. We’ll evaluate the post, the hinges, and the operator together. If the foundation is good, the retrofit usually saves you money over a full replacement. If it’s not, we will tell you to spend on the footing first.
Most driveway gates in Reseda with automatic openers should have either a loop detector or an equivalent safety edge. A loop detector lets the gate know when a vehicle is parked on it so it won’t close on the car. Many older Reseda gates were installed before that was standard, and we add loop detectors on almost every new automated driveway gate we install. It is the difference between a gate that works and a gate that works safely for the next twenty years.
That depends on where the sag is coming from. If the gate’s internal steel frame has cracked along a weld, we can often cut out the bad section and weld a new piece in. But in Reseda, the sag is more often the hinge post leaning. If the post has moved, welding the panel won’t fix it. We check the post first, use a level on the face of the gate, and then tell you exactly what needs to happen and what it costs before we start.
Reseda Gate Installation, Done by People Who Know This Valley
One thing that sets Reseda apart from the rest of the West Valley is the earthquake. Not the memory of it, but the concrete that remembers it. The 1994 Northridge quake’s epicenter was under this exact neighborhood. That’s not a trivia fact. It shows up in the tilt of a hinge post near Saticoy, in the hairline crack that opened again in a block pillar off White Oak, and in the odd pitch of a driveway where the gate binds every August.
On a 1960s tract home off Saticoy Street, we pulled a 45-year-old sliding gate whose 1970s concrete track had lipped and cracked from decades of valley heat cycling and post-quake micro-shifts. The original DoorKing operator’s control board was obsolete and the rack and pinion teeth were stripped. We didn’t bother with a roller swap. Instead, our crew poured a new post footing, re-poured the track bed, and installed a LiftMaster operator with a new loop detector and safety photocells. The homeowner had been fighting that gate for years. Now it closes like it should have the day it was hung.
If you live in the 91335 or 91337 zip codes and you’re tired of looking at a gate that doesn’t close, doesn’t open, or leans like it’s had enough, call (925) 307-8328. We’ll give you a straight answer, a written price, and a gate that stays put in the heat, the wind, and the next thirty years of whatever this valley does. Done right. Backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Reseda for over 42 years.