Gate Parts & Welding in Reseda - Made to Measure, Written Price

Fast, Reliable Gate Parts & Welding Across Reseda

When a gate post cracks or a hinge pin seizes on a 40-year-old Reseda swing gate, the fix usually comes down to two questions: can the existing steel be welded soundly, or does the post need to come out? In Reseda, hinge replacement on a typical 1970s-era driveway gate runs $280 to $520, and full post replacement with new concrete footings runs $650 to $1,150 per post. Most repairs we handle in the 91335 and 91337 zip codes are completed in one visit. Our crews carry welding rigs, replacement hinges, rollers, and latch hardware on the truck. Call (925) 307-8328 for a free estimate, and you will get a live person on the line, any hour, any day.

Call (925) 307-8328

Why Ironworks Gate Co. Is Reseda’s Preferred Gate Parts & Welding Company

We have spent decades working on the exact type of gates Reseda has in abundance: steel-framed swing and slide gates hung in the 1970s and 1980s, anchored to concrete block walls that went through the 1994 Northridge earthquake. That quake has shaped Reseda’s gate repair landscape more than any other single factor. Homeowners here know the epicenter was not actually under Northridge. It was directly beneath Reseda, along Reseda Blvd near Saticoy St. Thirty years later, we still see the fallout in gate posts that were cosmetically patched after the shaking but never structurally rebuilt. Our Gate Parts & Welding team understands what that means for load paths, hinge alignment, and track stability.

Ironworks Gate Co. has been in this trade for over 42 years, founded in 1984, and Victor Salinas leads a crew of background-checked, uniformed technicians who work by a simple code: Krafted right, every time, your home first, standing behind it. Every job is covered by a written 90-Day Done Right Promise. If a weld fails or a post shifts within 90 days, we come back and make it right. No paperwork, no arguing. We also stand behind our pricing: the number you approve before work starts is the number you pay when it is finished.

Reseda homeowners often tell us they have had trouble getting a contractor to answer the phone after the first call. That does not happen here. A live person answers 24 hours a day, 7 days a week. When you call about a gate dragging on its track or a post leaning toward the sidewalk, we schedule for the soonest available slot and our crew arrives when we say they will.

Our Gate Parts & Welding Services in Reseda

We focus on the structural and mechanical work that keeps a gate opening and closing for decades. Here are the four services Reseda homeowners call us for most often.

Hinge Replacement

Reseda’s interior valley heat cycles between cold winter nights and 105°F-plus summer afternoons, which dries out hinge lubricants and accelerates wear on steel pins. On gates hung in the 1970s, we commonly find hinge pins worn into an oval shape, causing the gate leaf to drop and drag. We cut out the old hinge barrels, weld in new heavy-gauge replacements, and re-hang the leaf square. Typical cost for a pair of welded hinge replacements in Reseda runs $280 to $520.

Post Replacement

This is the biggest and most important job we do in this city. A gate post that looks fine on the surface can be hiding a cracked footing from the 1994 earthquake. We have pulled posts in Reseda that were held together by a coat of stucco and not much else. When a post leans more than about one inch, or the gate panel sags visibly at the latch side, the post generally needs to come out. We saw-cut the old footing, set a new steel post in fresh concrete, and typically complete the job in one day. Cost in Reseda runs $650 to $1,150 per post, including new concrete and weld work.

Rail Repair

Many Reseda block-wall properties have sliding gates running on original 1970s concrete tracks. Thirty years of valley heat expansion and post-earthquake micro-shifts cause those tracks to crack and lip. When a roller hits a lipped section, the gate jumps or binds. Sometimes the track can be ground smooth and reinforced. When the substrate is cracked through, the honest fix is a full track re-pour. We will tell you which one you need and price it before we start.

Custom Welding

Some gate frames are worth saving, some are not. We weld cracks in steel frames, fabricate replacement pickets to match original patterns, and build custom brackets for obstinate installations. Our welders work in steel, iron, and aluminum. On a recent job on a Reseda Blvd block wall near Saticoy St, we replaced both hinge posts on a 1970s swing gate that had been cosmetically patched after the quake. The post footings were cracked and the gate sagged two inches. We cut out the old posts, poured new footings, and welded new hinges, straightening the gate without replacing the panel.

Other parts we supply and install across Reseda include gate rollers, latch and lock hardware, pull handles, drop rods, and cantilever trolleys. If the part moves or bears weight, we probably have it on the truck or can get it same week.

Trusted Brands We Service in Reseda

Our technicians are trained and equipped to service gate openers from FAAC, BFT, Linear, and Viking, along with five other major automation brands. For older Reseda systems, that matters. A lot of the operators we see on 1980s-era gates are Linear or FAAC units that have been out of production for years. We keep common replacement boards, limit switches, and capacitors in stock so we are not waiting a week on a parts order while your gate stays stuck open. If a board is obsolete and no longer available, we will tell you straight and quote a retrofit rather than string you along.

Common Gate Parts & Welding Problems We See in Reseda Homes

• Seized hinge pins on 40-50-year-old swing gates. Reseda’s dry heat strips lubricant fast, and weathered hinges on original 1970s gates seize solid. The gate still opens, but it groans and drags until the weld gives way.
• Cracked and lipped concrete slide gates tracks. Thermal cycling plus post-1994 foundation micro-shifts crack the original tracks. Rollers bind, jump, or grind flat spots into the wheels.
• Sagging frames from earthquake-damaged posts. A post that was cosmetically patched after the Northridge quake may look fine from the street. Inside the block wall, the footing is cracked and the post is slowly leaning, pulling the gate frame out of square.
• Legacy openers with obsolete control boards. We see 1980s-era gate motors on Reseda driveways that work when they want to. The motor may be fine, but the control board is discontinued. A retrofit usually costs less than a full system replacement.

Pricing for Gate Parts & Welding in Reseda, CA

We Also Serve Cities Near Reseda

While this page is written for Reseda homeowners, our crews also cover Reseda and the surrounding San Fernando Valley communities. If you live in Winnetka, Northridge, Porter Ranch, or Granada Hills, we provide the same 90-Day Done Right Promise, the same upfront pricing, and the same live-person phone support. Call and tell us your cross streets; we will give you a straight answer on timing.

FAQs - Gate Parts & Welding in Reseda