Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Hollywood
Gate repair in North Hollywood usually costs between $165 and $650 depending on whether we’re replacing a hinge, rebuilding a post, or retrofitting an obsolete operator. Most repairs in the 91601, 91602, and 91603 ZIP codes are completed in a single visit, and we quote the full price before any work begins. Ironworks Gate Co. has been fixing gates across the San Fernando Valley for over 42 years. If your gate is dragging, sagging, or refusing to close, call (925) 307-8328 and a live person will answer, day or night.
Why Ironworks Gate Co. Is North Hollywood’s Preferred Gate Repair Company
North Hollywood homeowners do not call us because they want a cheap patch. They call because the gate has failed for the third time, the last guy stopped answering his phone, and someone needs to explain honestly whether the old system is worth saving. That conversation is our specialty. Victor Salinas leads a crew of background-checked, uniformed technicians who work on gates the way they’d work at their own mother’s house. We show up when we say we will, we quote the price up front, and every job is covered by our written 90-Day Done Right Promise.
Our Gate Repair technicians know the specific failure patterns of North Hollywood’s housing stock, because we have been seeing them for decades. The 1950s bungalows off Vineland, the apartment corridors along Lankershim and Victory, the gated courts built behind Chandler Boulevard. When a swing gate sags on a post set in Valley soil, or a 1992 Linear operator trips its thermal overload in August, we already know what we’re walking into before we arrive. And our dispatch is coordinated right from our Los Angeles office, so we reach most North Hollywood addresses within the hour.
Our Gate Repair Services in North Hollywood
Electric Gate Repair
Electric gate repair in North Hollywood typically runs $190 to $480. The most common call we get from the 91601 through 91603 corridors involves an operator that works in the morning and quits by 2 p.m. That is almost always a thermal overload issue, and in this part of the Valley it’s an epidemic. The landlocked geography traps heat and North Hollywood regularly records some of the highest temperatures in greater Los Angeles. Operators installed in the 1980s and 1990s were never built to cycle in 110°F for thirty consecutive summers. We diagnose the control board, test the motor under load, and tell you straight whether a component swap will hold up or whether you’re better served by a full operator retrofit.
Automatic Gate Repair
Automatic gate repair is where our certified service across nine major brands pays off. If your gate opens when it should close or refuses to respond to the remote, the problem usually sits in the control board, the loop detector, or one of the safety photocells. Here around the NoHo Arts District and the neighborhoods east of the 170, prolonged UV exposure and heat degrade photocells and loop detectors faster than manufacturers’ specs assume. A typical photocell replacement runs $95 to $180, and a loop detector repair or re-cut falls between $250 and $450. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on our trucks. Most automatic gate repairs are finished in one visit.
Hinge & Post Repair
Hinge and post repair in North Hollywood costs between $220 and $600 depending on whether we are replacing a weld-in hinge barrel or digging and re-setting a post. The dry, expansive soil in this part of the Valley is rough on posts. Swing gates installed before modern footing standards loosen over time, and the post leans until the gate drags hard across the driveway. We cut out the old post when needed, pour a deeper footing, and re-hang the gate so it swings true. The sag correction we do here is a proper repair, not a shim and a prayer.
Gate Realignment
Gate realignment, including track straightening and roller replacement, runs $180 to $400 in North Hollywood. Slide gates that have spent thirty years rolling over superheated concrete develop flat spots that make the whole system fight itself. When the gate jerks and stutters mid-cycle, it’s almost always a rack-and-pinion alignment issue combined with worn polyurethane rollers. We realign the track, replace what’s worn, and reset the operator’s amp limits so the motor isn’t working against its own hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Hollywood
We train and stock parts for nine gate-automation brands, but the three we service most often in North Hollywood are DoorKing, Linear, and Viking. Those names carried the bulk of the Valley’s slide-gate wave in the late 1980s and early 1990s, so there are thousands of them still running here, and most of them are now three decades old. When you see an original DoorKing control board on an apartment gate off Victory, the question is rarely whether we can fix it. It’s whether fixing it still makes sense. We carry new control boards, remotes, receivers, and safety edge parts for these systems, and we will always give you a straight answer about what’s worth the money.
Common Gate Repair Problems We See in North Hollywood Homes
- Thermal overload trips on 1980s and 1990s operators. In the 91601-91603 ZIP codes, prolonged exposure above 100°F accelerates thermal-overload failures in older gate operators. The motor senses too much resistance, shuts down, and refuses to move until it cools off.
- Flat-spotted bottom rollers on slide gates. Rollers attached to aging iron slide gates sit directly on superheated concrete all summer. They crack, flat-spot, and cause the gate to drag, spike amp draw, and trip the overload. We see this far more in North Hollywood than in coastal LA neighborhoods.
- Loosening hinge posts and sagging swing gates. The dry, expansive soil in this part of the Valley shrinks and swells through the seasons, working shallow posts loose over time. A gate that sagged once and got bodged with washers will sag again unless the footing is re-done properly.
- Obsolete control boards and scarce replacement parts. Linear and DoorKing boards from the 1980s and 1990s fail after repeated thermal cycling in 110°F heat, and in many cases the part has been discontinued entirely. At that point, repair means a retrofit, not a board swap.
We rolled up to a 1980s-era apartment complex off Lankershim where a DoorKing slide gate had been tripping its thermal overload every afternoon. The gate operator tested fine on the bench, but the bottom rollers had flat-spotted from years on the superheated concrete driveway, causing the rack and pinion to bind mid-cycle. We replaced the polyurethane rollers, realigned the track, and reset the operator’s amp limits. The system has run clean through three Valley heat waves since.
Pricing for Gate Repair in North Hollywood, CA
Here is an honest look at what gate repair costs in North Hollywood. A hinge replacement on a standard swing gate runs $220 to $350. Post re-setting with a new footing runs $400 to $600. A photocell or safety edge replacement runs $95 to $200. A control board replacement for a modern operator runs $280 to $480, while a full operator retrofit on an old system can run $1,600 to $4,000 depending on the gate’s weight and length. Slide-gate roller and track work typically falls between $180 and $400. Every price is quoted and agreed before we turn a single bolt. We never start work on an open-ended estimate. If you have a written estimate from anyone else, bring it in and we’ll give you a free second opinion. And if your repair tops $250, we’ll take $50 off.
Call (925) 307-8328 for a free estimate on any North Hollywood gate repair. A live person answers, 24 hours a day, seven days a week.
We Also Serve Cities Near North Hollywood
In addition to our full North Hollywood coverage, we serve Sun Valley, Van Nuys, Panorama City, and Tujunga. If your property sits near the Burbank line or further east along the 170, we’re your local crew for the whole central Valley.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Hollywood
Because the operators were never rated for the San Fernando Valley’s sustained 100°F to 110°F summer cycles, and the gates themselves have grown harder to move as rollers flat-spot and tracks expand. The motor draws more amps to overcome the resistance, the thermal cutout trips, and the gate stops dead in the afternoon. Fixing it means replacing the worn mechanical components and resetting the operator’s amp limits, not just swapping the board. Call (925) 307-8328 and we’ll diagnose it properly.
For most 1980s and 1990s Linear, DoorKing, and Viking boards, the part is discontinued and whatever shows up on eBay costs more than it’s worth. A retrofit to a current operator with modern UL 325 entrapment protection usually makes better sense. We’ll give you a straight answer with real numbers before you spend anything. Estimates are free.
Because the post is moving in the expansive Valley soil, not the panel. Most older North Hollywood swing gates sit on footings poured too shallow and too narrow for current standards. We cut out the old post, pour a deeper footing, and re-hang the gate. It costs more than adding washers, but it stays fixed. That’s the point of the job.
UL 325 requires two independent entrapment protection devices on automatic gates, typically a non-contact sensor like a photocell and a contact sensor like a reversing edge, or an inherent reversing mechanism in the operator. North Hollywood’s heat and UV degrade these components faster than coast-side installs. We test every device on every visit. If your gate won’t close or reverses for no reason, do not bypass the sensors. Call us instead.
Because the steel track and gate frame expand in high heat, and the expansion turns small alignment errors into serious binding. That afternoon jerky movement is the gate literally fighting itself, and every bind cycle strips a little more off the rack teeth. Get it realigned before the gear strips. We can usually fix it the same day we look at it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Hollywood and the San Fernando Valley with dedicated gate repair, installation, and automation service.